Hitachi 326263 EBM315 3.6-Volt Lithium-Ion 1.5 Ah Battery
The Hitachi EBM315 3.6-Volt Lithium-Ion 1.5 Ah HXP Battery features the revolutionary Hitachi HXP Lithium-Ion technology. This advanced technology delivers a battery that is 50-percent lighter than an average NiCd battery, with a longer overall battery life and a longer run time than any other technology on the market. The HXP battery features a specialized internal circuitry system that is equipped with a current interruption and detection system, thermal protector, and an electronic switch to protect the battery against overcharge and discharge.
The EBM315 provides a steady level of power during the entire usage, ensuring the battery's full potential every time. This battery has a recharge life of approximately 1300 to 1500 times, as opposed to an average of 500 times for NiCd or NiMH batteries. It has a low power discharge while in storage so you can rest assured that your tools will always be ready when you are. Not only does the HXP battery deliver a longer life and extended power, it is also surprising lightweight. When you're using a tool powered by HXP technology, it feels like you're holding a 12-volt tool while experiencing the power of 18 volts. This reduces user fatigue and improves manageability without sacrificing power.
This battery is recharged with the Hitachi UC3SFL Battery Charger and is designed to power the Hitachi DB3DL Cordless Screwdriver and other compatible Hitachi tools. It is important to fully charge your battery before attempting to use it in your power tools. To charge your EBM315 battery properly, position the battery so that the nameplate faces towards the nameplate of the charger and press the battery into place until comes into full contact with the bottom of plate. Inserting the battery turns the charger on, and the pilot lamp should light up. If the pilot lamp does not light up, pull out the power cord from the base and check the battery mounting condition. Once your battery is fully charged, the pilot lamp goes off and you're battery is ready to use. In general, the UC3SFL should charge your battery in approximately 30 minutes. Although the variation is minor, ambient temperature above or below room temperature may effect recharging time.
The EBM315 provides a steady level of power during the entire usage, ensuring the battery's full potential every time. This battery has a recharge life of approximately 1300 to 1500 times, as opposed to an average of 500 times for NiCd or NiMH batteries. It has a low power discharge while in storage so you can rest assured that your tools will always be ready when you are. Not only does the HXP battery deliver a longer life and extended power, it is also surprising lightweight. When you're using a tool powered by HXP technology, it feels like you're holding a 12-volt tool while experiencing the power of 18 volts. This reduces user fatigue and improves manageability without sacrificing power.
This battery is recharged with the Hitachi UC3SFL Battery Charger and is designed to power the Hitachi DB3DL Cordless Screwdriver and other compatible Hitachi tools. It is important to fully charge your battery before attempting to use it in your power tools. To charge your EBM315 battery properly, position the battery so that the nameplate faces towards the nameplate of the charger and press the battery into place until comes into full contact with the bottom of plate. Inserting the battery turns the charger on, and the pilot lamp should light up. If the pilot lamp does not light up, pull out the power cord from the base and check the battery mounting condition. Once your battery is fully charged, the pilot lamp goes off and you're battery is ready to use. In general, the UC3SFL should charge your battery in approximately 30 minutes. Although the variation is minor, ambient temperature above or below room temperature may effect recharging time.
http://www.amazon.com/Hitachi-326263-3-6-Volt-Lithium-Ion-Battery/dp/B000K8AS9A?SubscriptionId=AKIAIBWAPDDWKD2O7RNA&tag=creecolo0a-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B000K8AS9A
B000K8AS9A
http://www.amazon.com/gp/product/images/B000K8AS9A/ref=dp_otherviews_3?ie=UTF8&tag=creecolo0a-20
Hitachi
Not rated yet.
The EBM315 provides a steady level of power during the entire usage, ensuring the battery's full potential every time. This battery has a recharge life of approximately 1300 to 1500 times, as opposed to an average of 500 times for NiCd or NiMH batteries. It has a low power discharge while in storage so you can rest assured that your tools will always be ready when you are. Not only does the HXP battery deliver a longer life and extended power, it is also surprising lightweight. When you're using a tool powered by HXP technology, it feels like you're holding a 12-volt tool while experiencing the power of 18 volts. This reduces user fatigue and improves manageability without sacrificing power.
This battery is recharged with the Hitachi UC3SFL Battery Charger and is designed to power the Hitachi DB3DL Cordless Screwdriver and other compatible Hitachi tools. It is important to fully charge your battery before attempting to use it in your power tools. To charge your EBM315 battery properly, position the battery so that the nameplate faces towards the nameplate of the charger and press the battery into place until comes into full contact with the bottom of plate. Inserting the battery turns the charger on, and the pilot lamp should light up. If the pilot lamp does not light up, pull out the power cord from the base and check the battery mounting condition. Once your battery is fully charged, the pilot lamp goes off and you're battery is ready to use. In general, the UC3SFL should charge your battery in approximately 30 minutes. Although the variation is minor, ambient temperature above or below room temperature may effect recharging time.
Feature:
- 3.0-Amp/Hr and 40-Percent less weight than Ni-Cad or NiMH batteries
- 3 Times as many charge cycles as Ni-Cad batteries
- 25-Percent more run time per charge that Ni-Cad batteries
- Weighs less than pound
- Overcharge and over discharge protection to increase the life of the battery
